Rocker Arms for 263 needed

André

Member
Hello everyone,
my name is André and I´m from Germany.
This is my first post.
I'm looking for rocker arms for my 263cui from 1951 which is currently under construction.
I need 3x 1303840 and 3x 1303841 or if someone has a set would be great.
Maybe you can just give me an address where I can get some.
My rocker shaft is okay, only the 6 arms have rust scars in the bearings.

I have already seen the Black machine assambly but firstly I would rather stay original and secondly it is a proud price ;)

I still have a 248cui motor here but unfortunately these rocker arms have either rust scars in the bearing or the pressure surfaces already have notches from the valves

Thank you in advance, I hope my search will be successful.

Best regards

André
 
Yes i have seen them but it is to expensive.

And Egge only Rebuild. See a

😩

Thank you for your help

André
 

Attachments

  • BFBE3CA7-BFBA-4194-BC19-EA287CB2C7A7.jpeg
    BFBE3CA7-BFBA-4194-BC19-EA287CB2C7A7.jpeg
    1 MB · Views: 5
I have looked a couple of trimes , but you are right. impossible to find. You may have to have them made ( machined). Succes
 
If you have a good machinist friend he could bore out the inside of the rocker arms, buy bushing material to fit the shaft and turn down outside to press into rocker arm. I say friend because this would be very expensive to hire someone to do it.
 
Back
Top