2v carb spacer w/PCV adapter -- source?

C

cknapp

Guest
I've got a 1955 41 Special with Carter WCD 2 barrel. In 1965, for California emission compliance, a ceramic spacer was installed that has a 1/2" tube that connects a rubber tube to a PCV valve and on to the crankcase breather hole.

The spacer has cracked. I can't find a replacement. I'd like to keep this setup rather than get an original breather tube, as it reduces emissions and eliminates blow-by spray on the underside of the car. Any ideas on where to find of have one made?

Charles Knapp
charles@myknapp.com
720-299-7298
 
I would talk to a machinist,and have them make a new one from aluminum. I doubt you'll ever find another ceramic one, especially in good shape. -Zach.
 
Charles
The 56 4 barrel intake on my car ( Intake is off California car ) was just drilled and taped for steel nipple that is the size of a vent valve end. I found a water pump bypass hose that fits the body of the vent valve on one end and the valley cover on the other end, this set up works on my car.
Judd
 
You must log in or register to reply here.
Back
Top