You guys are awesome and appreciate to no extent the help! I got to the point where all is hooked up properly, but left to go south for vacation, so didnt have the chance to fully finish. I cranked it once and fired, yet ran very rough, which i contributed to the vacuum advance needing adjusted. When i returned, i started the process and before i go too far, wanted to see if i should. I put a little fuel down her throat and cranked with it firing. It still ran rough, but also spit some fuel back out, so i shut it off and came here just in case it was something more severe........ Can anyone give me an idea if this is normal? Thanks!
I will be donating for your time:_)