Bill of Sale

Need 1966 buick part

terry march

Active Member
Hello friends I need a pitman arm for a 1966 Buick Riviera. Can anyone tell me where to find one or an cross reference part number that will work?
 
Terry,

1st. I will need a measurement of yours to be absolutely sure I have the correct one. Don't want to take any chances with one being the wrong part.
I will need a name ( Terry March???)& shipping address to quote shipping costs.
I don't do PayPal or any of the fancy stuff. Just old school transactions. Bank/Cashiers Check, Postal Money Order, regular Money Order or personal Check ALL made out to myself (will have to wait until it clears) & sent to the address below.
$50.00 plus shipping.

Tom T.
 
Terry,

The spline count for the "808" boxes are the same for ALL the full size Buick's including the Riv. Same goes for the center link mounting.
Is the number you got from the pitman arm or what you got out of a parts book???
If the ones I have measure the same I will go to the P.O. & get a shipping cost for overnight or 2-3 day shipping.

Tom T.
 
Terry,

The overnight cost to ship is $26.35 + $1.79 for a padded envelope which equals $28.14 + the cost of the part for a total of $78.14
2-3 day piority $7.75 + $1.79 + $50.00 for a total of $59.54
The pitman arm I have meassures approx. 7 1/8th. inches.

Tom T.
 

terry march

Active Member
Terry,

The spline count for the "808" boxes are the same for ALL the full size Buick's including the Riv. Same goes for the center link mounting.
Is the number you got from the pitman arm or what you got out of a parts book???
If the ones I have measure the same I will go to the P.O. & get a shipping cost for overnight or 2-3 day shipping.

Tom T.
The number is from the pitman arm connected to the steering box. Send me your name and address for payment.
 
Terry,

The pitman arm I have has the numbers EXACTLY the same except for the last digit is 256 verses yours of 250. Like I said the one I have is approx.
7 1/8 inches end to end & has a very slight bend in it.
It's at the bottom of my reply Terry.

Tom Telesco
12 Cook St.
Norwalk, Ct. 06853-1601

Tom T.
 

terry march

Active Member
Terry,

The overnight cost to ship is $26.35 + $1.79 for a padded envelope which equals $28.14 + the cost of the part for a total of $78.14
2-3 day piority $7.75 + $1.79 + $50.00 for a total of $59.54
The pitman arm I have meassures approx. 7 1/8th. inches.

Tom T.
I'm going to go with the 2-3 priority for the total of 59.54. I'll mail you a money order. Tomorrow morning.
 
Terry,

Like I stated the one I have has a slight bend in it. From the pic it's from the wrong angle I would need a pic direct from the side, BUT you said it's straight so this one is wrong. I will look to see IF I may have something else.
Get back to you in the am.

I haven't even gotten into why you think you may need a pitman arm as they are none wear items.

Tom T.
 

terry march

Active Member
Terry,

Like I stated the one I have has a slight bend in it. From the pic it's from the wrong angle I would need a pic direct from the side, BUT you said it's straight so this one is wrong. I will look to see IF I may have something else.
Get back to you in the am.

I haven't even gotten into why you think you may need a pitman arm as they are none wear items.

Tom T.
I was going to get my tires aligned they said that they couldn't do it because I needed upper and lower ball joints and he drove the car and noticed the steering was loose and when you hit a bump in the street the steering wheel moves everywhere. A lot of play in the steering wheel hard to drive it. Dangerous!
 
Top