Pushrods

Jyrki

Jyrki

Team Member
Moderator
What is the length of the stock 320 pushrod (solid cam)?
I'm looking at the 3/8" titanium tubes that are sold on eBay at 12" lengths. Thinking of using the stock pushrod ends with a titanium tube - how cool would that be?
But I fear that 12" might be just a tad too short?
 
Last edited:
We used the 4130 moly tube from Aircraft Spruce with the stock tips. Works really well. Let us know how the Titainium works out. How it cuts, etc.
Doug:D
 
Jyrki said:
What is the length of the stock 320 pushrod (solid cam)?
I'm looking at the 3/8" titanium tubes that are sold on eBay at 12" lengths. Thinking of using the stock pushrod ends with a titanium tube - how cool would that be?
But I fear that 12" might be just a tad too short?
Click to expand...



Jyrki........the pushrods I use with the stock lifter are 13.385" (over all) and that is with the head cut quite -a-bit. So I don't think 12 is long enough on that material you re talking about. As you can see from above I have mine made at Smith Brothers. They have been a wealth of information.
 
Thanks for the info, Dale!
Gerry Duttweiler uses Smith pushrods, too. It's just that I like fabricating things :smash:
 
You must log in or register to reply here.
Back
Top