320 rod

[saltracer]

Can someone give me the "big end" bore on a 320 rod ?

 

[saltracer]

Little help guys...........need to re-work some 320 rods, anybody got info on what size to hone the bearing end too..

 

[Buick Guy]

Dale,
I can measure a stock rod with unknown history for you if that would help. We use a rod with a small block Chevy journal size in the Salt Cat. Let me know and I'll dig out a stocker and measure it on the big end.
Doug

 

[rcull]

Reference section, '52 Chassis manual, Engine, Engine Specifications, page 2-4:

http://www.teambuick.com/reference/library/52_shop/files/2-a.pdf

2 1/4" is the standard bearing or crank journal diameter.

 

[34 Buick 61]

320 rod bore

Max. bore 2.3755

 

[saltracer]

Max. bore 2.3755

Thanks to everyones' help........2.3755" is the number I was looking for....