Can someone give me the "big end" bore on a 320 rod ?
S saltracer Active Member May 11, 2012 #2 Little help guys...........need to re-work some 320 rods, anybody got info on what size to hone the bearing end too..
Little help guys...........need to re-work some 320 rods, anybody got info on what size to hone the bearing end too..
B Buick Guy Active Member May 11, 2012 #3 Dale, I can measure a stock rod with unknown history for you if that would help. We use a rod with a small block Chevy journal size in the Salt Cat. Let me know and I'll dig out a stocker and measure it on the big end. Doug
Dale, I can measure a stock rod with unknown history for you if that would help. We use a rod with a small block Chevy journal size in the Salt Cat. Let me know and I'll dig out a stocker and measure it on the big end. Doug
rcull May 11, 2012 #4 Reference section, '52 Chassis manual, Engine, Engine Specifications, page 2-4: http://www.teambuick.com/reference/library/52_shop/files/2-a.pdf 2 1/4" is the standard bearing or crank journal diameter.
Reference section, '52 Chassis manual, Engine, Engine Specifications, page 2-4: http://www.teambuick.com/reference/library/52_shop/files/2-a.pdf 2 1/4" is the standard bearing or crank journal diameter.
S saltracer Active Member May 12, 2012 #6 34 Buick 61 said: Max. bore 2.3755 Click to expand... Thanks to everyones' help........2.3755" is the number I was looking for....
34 Buick 61 said: Max. bore 2.3755 Click to expand... Thanks to everyones' help........2.3755" is the number I was looking for....