Armrest Indicator Lights on LeSabre

I

IndyBuick

Member
How does one gain access to the indicator lights on a mid 1990s LeSabre driver's door armrest for the power locks and the mirror/seat/windows control panel? The other doors indicator lights work, just the driver's door doesn't. This didn't happen until the PCM got replaced last week. The indicator lights for the headlights work.

Thanks!
 
It might be a blown fuse or something. Check the computer to see if you have any codes first then go with checking the wiring.

I have not worked on the specific car mentioned, but while I was working at Toyota, I had to fiddle with door panels and such.
You probably have to take of the door panel. There should be around 4 screws or more to take out. Look around the perimeter of the panel and see if you can see screws, or plastic screw conver-ups. Start with those. If it doesn't come off, look for more toward the center, near the armrest.
Take off the panel, and you should see wires for the lights and such. It might be that you need new switches.
 
You must log in or register to reply here.
Back
Top