jmfrazier1
Member
Is it possible to change the oil pan gasket in the car on a 50 super with a straight 8? I have all of the bolts loose but it seems to be hitting the oil pump. I don't have a hoist to raise the engine up but I am pondering putting a jack under some portion of the engine to get a little bit of lift to get the pan out of there. Also with the dynaflow in the car, I wanted to change the pan gasket but after removing all of the bolts and nuts on the pan, it wouldnt come loose even with a mini sledge hitting a piece of wood against the pan. I am wondering if someone might have put epoxy on this to keep it from leaking and permanently seal it up. Any thoughts?